Rubber Products

 O-Ring is a simple and versatile ring-shaped packing or sealing device with a circular cross section. The opposite side of an O Ring are squeezed between the walls of the cavity or gland into which the O -Ring is installed. The zero clearance within the gland provides an effective sealing and blocking the flow of liquids, and gases through the glands. Internal pressure dynamics and static. O-rings are available in a variety of materials, in both standard and custom sizes. Our proprietary compounds are designed to perform in a wide range of applications with varying chemical exposures, pressures and temperatures.


Other Details:

• Aflas
• Flouroelastomer (viton)
• Silicone
• Buna - n (Nbr , Nitrile)
• Epdm
• HNBR
• Hypalon
• Neoprene

Offering you a complete choice of products which include Molded Rubber Products such as Rubber Conductive Pads, Ring Grommets, Rubber Sleeves and Rubber Cords.

Rubber Gasket are widely used in various industries to fill space between two objects and hence prevent the leakage while under compression. These are providing high pressure sealing under static condition. All Gasket is available in variety of custom shapes and sizes and can be fabricated from customer specified materials. Typically they are used to prevent leakage between two objects while under compression. Our proprietary compounds are designed to perform in a wide range of applications with varying chemical exposures, pressures and temperatures.

Other Details:

• Aflas
• Flouroelastomer (viton)
• Silicone
• Buna -N (NBR , Nitrile)
• Epdm
• HNBR
• Hypalon
• Neoprene

 

Our product range includes a wide range of Rubber Mounts such as Round Base Mounts, Anti Vibration Mounts and Custom Made Anti Vibration Mounts.

 

Rubber Bellow are widely used for sucking or discharging of water, oil, air. Rubber bellow is an expandable/collapsible component used to protect the components from foreign particles. Bellows are available in a variety of materials, as per custom sizes and shape. Our proprietary compounds are designed to perform in a wide range of applications with varying chemical exposures, pressures and temperatures.

Other Details:

• Aflas
• Flouroelastomer (viton)
• Silicone
• Buna -N (NBR , Nitrile)
• Epdm
• HNBR
• Hypalon
• Neoprene

Rubber Diaphragm is the rubber valve type with or without consolidated with high strength fabric. The pressure is always dynamically changing and the control of that change is the duty of the diaphragm. Diaphragms are sealing & movable dividing membranes between two components with compressed air and the liquid of the pump. Diaphragm life will vary depending on the abrasiveness of your process fluid, temperature, and size of diaphragm, pumping media, and lift conditions. Diaphragms are available in a variety of materials, in both standard and custom sizes and shape. Our proprietary compounds are designed to perform in a wide range of applications with varying chemical exposures, pressures and temperatures.

Rubber Bushing is a type of vibration Isolator. It provides an interface between two parts, damping the energy transmitted through the bushing. A common application is in vehicle suspension systems, where a bushing made of rubber (or, more often, synthetic rubber or polyurethane) separates the faces of two metal objects while allowing a certain amount of movement. This movement allows the suspension parts to move freely, for example, when traveling over a large bump, while minimizing transmission of noise and small vibrations through to the chassis of the vehicle.

Rubber Quad-Rings also known as X-Rings, can be used in a wide variety of static and dynamic sealing applications. The four-lobed design provides twice the sealing surface in comparison to a standard o-ring. The double-seal action requires less squeeze to maintain an effective seal. This reduction in squeeze means less friction and improved seal life.
X-Ring parting lines are between the lobes, away from the sealing surface, thus eliminating the problems of leakage often resulting from a parting line's irregular surface as found on an O-Ring.

X-Rings are designed to outperform a standard O-Ring in rotary seal applications. The four-lobed configuration creates a more stable seal avoiding spiral twisting. This allows the use of a more narrow groove width than a standard O-Ring groove, but can also be used in a standard O-Ring groove. X-Rings are available in standard O-Rings sizes.  

 

 

We are a leading Manufacturer of custom designed rubber diaphragm, rubber rolling diaphragms, fluoro silicone diaphragm, rubberised valve diaphragms and lpg & cng diaphragms from Navi Mumbai, India.

Our product range includes a wide range of rubber moulded components, rubber bent hose and rubber bearings.

Providing you the best range of industrial rubber products with effective & timely delivery.